How to install Fontana Denver Chrome Digital Touch Panel Thermostatic Shower Set | FS9645
Visit Product Page
Installation Instructions for Bathroom Shower Set
Before you begin, please read the installation instructions below. Observe all local building and safety codes.
Unpack and inspect the product for any shipping damages. If you find damages, do not install.
Please note all products must be installed by a professional and certified plumber otherwise warranty might be voided.
shower
Shower Head Installation Instructions
shower
Showerhead Size: 16" x 16"
Step 1:
Step 2:
According to the shower size, mark the location of the mounting holes. Use a drill with a 6mm bit to drill mounting holes into studs or blocking.
Install the mounting brackets (C) with the tapping screws (D). Thread the shower bars (E) onto the mounting brackets, and the inlet hose (F) onto the water inlet.
Step 3:
Step 4:
Attach the showerhead (A) to the shower bars (E). Connect the inlet hose (F) to the showerhead.
3 water inlets so the water disperses equally throughout the showerhead.
